|
The permitted quantity of water that is used for industrial purposes in the South Platte subbasin is the fourth largest industrial water use amount among the seven subbasins in the Wyoming Platte River Basin. The majority of permitted use is classified as industrial use for aggregate and concrete production. Permitted industrial water use in this subbasin comprises approximately 6 percent of all permitted Wyoming Platte River Basin industrial water use for groundwater and surface water combined. Groundwater and surface water use composes about 96 percent and 4 percent, respectively, of industrial permitted water use in the South Platte subbasin.
To view a map of the industrial groundwater use in the South Platte River subbasin click here.
The following table summarizes the largest aggregate, cement and concrete production of industrial groundwater use in the South Platte subbasin. To view all industrial groundwater users, click here.
Summary - Wyoming State Engineer's Office data for industrial use of groundwater for aggregate, cement and concrete production in the South Platte subbasin
User |
SEO certificate, permit number(s) |
SEO permitted yield (gallons per minute) |
Total permitted yield (gallons per minute) |
Martin Marietta Materials (previously Granite Canyon Quarry) |
P101502W |
1,000 |
1,260 |
P101501W |
205 |
P79709W |
55 |
E.G. Sanders |
CU1/240A (P6339W) |
600 |
925 |
CU1/225A (P314W) |
325 |
Read Readymix Company |
P2576W |
200 |
200 |
|
|