Identification_Information: Citation: Citation_Information: Originator: James C. Case, Christopher S. Arneson, and Laura L. Hallberg Publication_Date: 1998 Title: Preliminary 1:500,000-Scale Digital Surficial Geology Map of Wyoming Publication_Information: Publication_Place: Laramie, Wyoming Publisher: Wyoming State Geological Survey Online_Linkage: Description: Abstract: This dataset represents surficial geology of Wyoming at 1:500,000-scale. The layer contains 577 separate surficial feature (landforms) and deposit descriptions present on the surface in the state. Compiled from aerial photography and existing maps this layer represents the first comprehensive surficial geology map of Wyoming. Purpose: The layer was developed by a partnership of the Wyoming State Geological Survey and the Wyoming Water Resources Center. It was originally created specifically for use in the Wyoming Ground-Water Vulnerability Mapping Project being conducted at the Wyoming Water Resources Center, a statewide study of aquifer vulnerability to contamination from pesticides. In that context, it was to be used to assist in the generation of a new state soils map, to analyze the effects of the vadose zone on contaminant migration, to define specific Quaternary- age aquifers, and to refine the analysis of regional hydrogeologic settings. The Surficial Geology Map of Wyoming can be used, in conjunction with a bedrock geologic map, as a guide in siting new facilities or industries in Wyoming. It can also be used to identify and locate geologic hazards, such as landslides and windblown deposits, or to assist in the search for shallow ground water supplies and for construction aggregate. The map has already been used to assist the Wyoming Gap Analysis Project (Merrill and others, 1997) in southwestern Wyoming, and in the generation of Quaternary Geologic Maps of Wyoming. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1998 Currentness_Reference: publication date Status: Progress: complete Maintenance_and_Update_Frequency: none planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -111.26477012 East_Bounding_Coordinate: -103.83670034 North_Bounding_Coordinate: 44.99903411 South_Bounding_Coordinate: 40.94837176 Keywords: Theme: Theme_Keyword: geology Theme_Keyword: surficial Theme_Keyword: quaternary Theme_Keyword: groundwater vulnerability Theme_Keyword: aquifer sensitivity Theme_Keyword_Thesaurus: None Place: Place_Keyword: Wyoming Place_Keyword_Thesaurus: None Access_Constraints: none Use_Constraints: The data should not be used without first reading the full data documentation in WSGS HDSM 98-1. This data should not be used for analysis at a scale larger than 1:500,000. This dataset may not be redistributed or repackaged in any form without the express written consent of the Wyoming State Geological Survey. Point_of_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Chris Arneson Contact_Organization: Spatial Data and Visualization Center Contact_Address: Address_Type: mailing address Address: Box 3355 University Station City: Laramie State_or_Province: Wyoming Country: USA Postal_Code: 82071 Contact_Voice_Telephone: 307-766-2735 Contact_Electronic_Mail_Address: n/a Hours_of_Service: 8 AM to 5 PM MST Native_Data_Set_Environment: This dataset is a polygon layer created using ARC/INFO version 6.2 on a SUN Microsystems UNIX computer. The layer is ARC/INFO export file format and ARC/INFO shapefile format. Browse_Graphic: Browse_graphic_file_name: Browse_graphic_file_description: surficial geology Browse_graphic_file_type: gif Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: see Process Steps Completeness_Report: All polygons are fully attributed. Logical_Consistency_Report: All polygons are closed and each polygon has one unique label. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: see Process Steps Lineage: Source_Information: Source_Citation: Citation_Information: Originator: US Geological Survey Publication_Date: unknown Title: National High Altitude Photography (NHAP) Type_of_Source_Media: film Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 1980 Ending_Date: 1982 Source_Currentness_Reference: ground condition Source_Scale_Denominator: 58200 Source_Citation_Abbreviation: NHAP photos Source_Contribution: photo interpretation of surficial geology Source_Information: Source_Citation: Citation_Information: Originator: US Bureau of Land Management Publication_Date: unknown Title: CPIR, RWIR, WWIR, RKSP series photography Type_of_Source_Media: film Source_Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 1974 Ending_Date: 1976 Source_Currentness_Reference: ground condition Source_Scale_Denominator: 31680 Source_Citation_Abbreviation: BLM photos Source_Contribution: photo interpretation of surficial geology Source_Information: Source_Citation: Citation_Information: Originator: US Natural Resources Conservation Service Publication_Date: unknown Title: AAM and BBT series photography Type_of_Source_Media: film Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1966 Source_Currentness_Reference: ground condition Source_Scale_Denominator: 20000 Source_Citation_Abbreviation: NRCS photos Source_Contribution: photo interpretation of surficial geology Process_Step: Process_Description: All citations mentioned are included in this report: Case, J.C., Arneson, C.S., and Hallberg, L.L., 1998, Preliminary 1:500,000-scale digital surficial geology map of Wyoming: Wyoming State Geological Survey, Geologic Hazards Section Digital Map 98-1 (HDSM 98-1), scale 1:500,000. Surficial geology was interpreted primarily using the NHAP photography. Color infrared BLM photos were used to provide detail in select areas of the stae. In northeastern Laramie County and southeastern Goshen County, black and white NRCS photos were used where NHAP photos were not available. In localized areas, additional photography from multiple sources and dates was used to fill small gaps in the NHAP coverage. The photography was analyzed by using a Fairchild Aviation Corporation Magnifying Mirror Stereoscope and an Abrams Instrument Corporation Pocket Stereoscope. Existing maps of surficial geology were examined, modified, and transferred to a 1:500,000-scale base map. In Yellowstone National Park and northern Teton County, existing surficial geologic maps of the area were modified to provide a classification consistent with the rest of the project (Pierce, 1973, 1974a, 1974b, 1974c; Richmond, 1973a, 1973b, 1973c, 1973d, 1974, 1977; Richmond and Pierce, 1971, 1972; Richmond and Waldrop, 1972, 1975; Waldrop, 1975a, 1975b; Waldrop and Pierce, 1975) In southwest Wyoming, existing surficial materials maps for the Kemmerer and Evanston 30' x 60' Quadrangles (Gibbons, 1986) were also modified, after examination of aerial photography, to provide a classification consistent with the rest of the project. In the Powder River Basin, existing surficial geologic maps for the Recluse 30' x 60' Quadrangle (Reheis and Williams, 1984), the Reno Junction 30' x 60' Quadrangle (Reheis and Coates, 1987), and the Gillette 30' x 60' Quadrangle (Reheis, 1987) were slightly modified to provide a classification consistent with the rest of the project. The Geologic Hazards Section at the Wyoming State Geological Survey has developed a series of techniques for mapping surficial features and deposits from aerial photography. Over the last sixteen years, Section personnel have mapped landslides, windblown deposits, active faults, and man-made features for the entire State of Wyoming. Much of the previous work has been accomplished by conducting a field examination of the area of interest, and then by applying the field examination to the interpretation of aerial photographs. Most of the interpretative techniques utilized in this project were derived from limited field examination in addition to standard aerial photo interpretation methodologies as defined in Von Bandat (1962), Reeves, Anson, and Landen (1975), Avery (1977), and Lillesand and Kiefer (1979). Surficial features and deposits were mapped at scales of 1:100,000 and 1:500,000. The smallest feature/deposit shown on the 1:100,000-scale map has a diameter or width of approximately 200 meters. At a scale of 1:500,000, the smallest feature/deposit shown has a diameter or width of approximately 500 meters. Material types are not delineated on the Surficial Geology Map of Wyoming. In parts of western Wyoming, the surficial geology was directly mapped at a scale of 1:500,000 by utilizing aerial photography, existing landslide maps, and existing geologic maps. The reasons for this approach in western Wyoming are that many of the surficial features were previously mapped landslides or glacial deposits, and that the terrain was distinct enough to allow for mapping at a scale of 1:500,000. In Teton County and northern Lincoln County, the geologic map of Grand Teton National Park (Love, Reed, and Christiansen, 1992), the geologic map of the Wyoming portion of the Driggs 1 x 2 (Love 1982), and the Geologic Map of Wyoming (Love and Christiansen, 1985) served as the basis for the surficial geology mapped from aerial photography. In the central parts of Lincoln County, the geologic maps of the Preston 1 x 2 Quadrangle (Oriel and Platt, 1980), the Geologic Map of Wyoming (Love and Christiansen, 1985), the Cokeville 30- Minute Quadrangle (Rubey, Oriel, and Tracey, 1980), and the Afton and part of the Big Piney 30-Minute Quadrangles (Rubey, 1973) served as the basis for the surficial geology mapped from aerial photography. In the Wind River Basin and surrounding mountains, the Structural Geology of the Wind River Basin, Wyoming (Keefer, 1970), the Geologic Map of Wyoming (Love and Christiansen, 1985), the Mineral Resources of the Teton Wilderness and Adjacent Areas (Antweiler and others, 1989), the Ground-Water Resources of the Wind River Indian Reservation, Wyoming (McGreevy, Hodson, and Rucker, 1969), and the Ground-Water Reconnaissance of the Green River Basin, Southwestern Wyoming (Welder, 1968) served as the basis for the surficial geology mapped from aerial photography. Landslides were derived from Case and others (1991) and Larsen and others (1991). Most of Wyoming was newly mapped at a scale of 1:100,000 by utilizing the previously mentioned photography. The reason for mapping most of the State at a scale of 1:100,000 instead of at a scale of 1:500,000 was that there was insufficient detail on existing 1:500,000-scale base layers to properly locate small features in the basins and in areas of low relief. All available geologic maps listed in Wyoming State Geological Survey Map Series 9A-9R (De Bruin, 1983, 1984, 1985; De Bruin and Greer, 1986; Glass, 1981; Greer and Ver Ploeg, 1989; King and Ver Ploeg, 1990) provided guidance for the mapping. Many of the 1:100,000-scale surficial geology maps contained too much detail to be transferred to the 1:500,000-scale base. In such areas, mapped units were combined before they were transferred to the 1:500,000- scale base, with every effort made to combine similar or related units. The same mapped units were not consistently combined, as the combinations were dependent only on the density of the mapped units in any area. Process_Date: unknown Process_Step: Process_Description: The 1:500,000-scale inked green-line copy of the surficial geology linework drafted at the Wyoming State Geological Survey was scanned into ARC/INFO Version 6.21 at a 400 dpi (dots per inch) resolution by the Wyoming Water Resources Center GIS Lab. Because of the physical size of a 1:500,000-scale map of Wyoming, the map had to be scanned in three portions. Each of these portions was individually registered using latitude- longitude tic locations, and eventually rejoined. The RMS (Root Mean Squared) error in the registration procedure was limited to 0.006 inches as a standard. The scanned raster image was converted to a vector GIS format using ARC/INFO's GRIDLINE utility and then manually edited within ARCEDIT to remove any linework anomalies. In addition to removing slivers and other vectorization artifacts, a new state boundary was added that had been previously digitized at a scale of 1:100,000 as a part of the Wyoming Gap Analysis Project (Merrill and others, 1997). This boundary was added to ease the comparison with other 1:100,000-scale datasets previously created within the state. Quality control procedures, which consisted of plotting the new dataset at a scale of 1:500,000 and comparing it on a light- table to the original to detect linework errors and omissions, were then performed on the data. Once attributed, the dataset was once again checked for accuracy. Dissolve routines as well as extensive manual inspections were performed to identify unclosed polygons as well as mis-labeled polygons. After a thorough review by the WSGS, several small changes were made to the linework to add necessary additional detail. These changes were made using a digitizer and were limited to small areas in the western edge of the state. Once again the RMS error was limited to 0.006 inches. When the linework was finalized, 47,062 line segments were included as well as 16,608 individual polygons. Each polygon was attributed with the ten-digit character item SG-UNIT which contains the original surficial geology unit attribute. The domain of this field included the 577 original descriptions. Another field was later added to depict the simplified attributing scheme developed by the WSGS. This character field was called RECLASS and includes only the 25 simplified values. Currently the product can be referred to as Version 1.0 but additional errors may exist which will be fixed in future releases. It should be noted that if the product is viewed at a scale much larger than 1:500,000 the linework will appear jagged. This is an artifact remaining from the vectorization process that exists within the ARC/INFO software. No smoothing routines were performed on the linework in order to ensure that no error propogation exists. Process_Date: 1997 Spatial_Data_Organization_Information: Direct_Spatial_Reference_Method: Vector Point_and_Vector_Object_Information: SDTS_Terms_Description: SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains Point_and_Vector_Object_Count: 16609 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic Latitude_Resolution: .001 Longitude_Resolution: .001 Geographic_Coordinate_Units: Decimal Degrees Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: GRS1980 Semi-major_Axis: 6378206.4 Denominator_of_Flattening_Ratio: 294.98 Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: The classification scheme has two phases, with the first phase being a simple classification of single units, such as alluvium (a), colluvium (c), eolian (e), bedrock (R), and grus (u). The complete single-element classification is as follows: A old alluvial plain - a broad, relatively flat deposit formed by the regional erosion of coalescing alluvial and associated alluvial deposits. a alluvium - stream and river deposits b bench - a strip of relatively level earth or rock, raised and capped with gravel. b/m bench and/or mesa (could not be determined from aerial photos) c colluvium - loose and incoherent deposits, usually at the foot of a cliff or on the surface of a slope and there chiefly by gravity. d dissected e eolian deposits - wind blown deposits, includes sand, silt, and clay f alluvial fan deposits - a fan shaped deposit made by a stream or a debris flow where they have run out onto a level plain. G glaciated bedrock - bedrock that has been scoured and carved out by glacial action. g glacial deposits - deposits that have been formed through glacial action, such as till and moraine. h hot spring deposit - travertine and silaceous sinter deposits. i includes other surficial deposits (25 element classification) K Karst - a type of topology formed over limestone, dolomite, gypsum, or other salts by dissolving or solution, and that is characterized by closed depressions or sinkholes. k clinker - bedrock that has been baked and fused as a result of a burning coal seam. L Tertiary landslide l landslide - earth and rock which became loosened from a hillside and slides, flows, or falls down the slope. M large open pit mine/quarry m mesa - a bedrock capped plateau or tableland. o glacial outwash - alluvium and drift deposited by meltwater streams beyond active glacier ice. p playa lake - broad, shallow sheets of water which quickly gather and evaporite, leaving mud flats or broad, shallow deposits. q periglacial deposits - patterened ground associated with nearby glaciated areas. R bedrock r residuum - a residual deposit remaining in place after the decomposition of rocks. s slopewash - soil and rock material that has been moved down a slope by gravity assisted by running water. T structural terrace - a terrace cut in bedrock that is mantled with a thin veneer of alluvium. T/t structural terrace and/or terrace deposits (could not be determined from aerial photos) t terrace deposits - relict alluvial deposits on relatively flat, horizontal, or gently inclined surfaces which are bounded by a steeper ascending slope on one side and by a steeper descending slope on the opposite side. u grus - an accumulation of angular, coarse- grained fragments resulting from the granular disintegration of crystalline rocks. v volcanic neck - cylindrical to spire-shaped form that is a remnant of solidified magma that filled the vent of an extinct volcano. w lacustrine deposits - deposits associated with lakes. x truncated, upturned bedrock The second phase of the classification combines the single elements into a multi-element classification for a specific mapping unit. In many cases, a specific mapping unit may be composed of many single elements, such as slopewash (s), colluvium (c), and bedrock (R), that in certain areas can not be shown separately at scales of 1:100,000 or 1:500,000. In such cases, the single elements were combined into a more complex unit (scR), with the single elements ranked from most dominant to least dominant. The mapping unit scR would then represent a complex deposit composed of slopewash, colluvium, and bedrock outcrops, with more slopewash present than either colluvium or bedrock outcrop. Approximately 650 complex units were mapped for the 1:100,000-scale map and 577 units were mapped for the 1:500,000-scale map, with a simple description of each unit presented in Appendix A. These complex units for the 1:500,000-scale map are stored in the attribute SG- UNIT. In order to achieve the objectives of the Ground-Water Vulnerability to Pesticide Contamination Project (Hamerlinck and Arneson, 1998), it was necessary to devise a classification scheme that was a simplification of the complex 650-unit scheme described above. A 25-element classification scheme that delineated simplified mapping units of most significance to contaminant migration was devised. The 25-element classification was composed of simple combinations of the single elements described above, and also included each of the 650 complex units as subsets. For example, the classification bi represents a bench that includes eolian, slopewash, outwash, and bench/mesa deposits. These attributes are stored in the layer item RECLASS. The complete association between the 25-element classification and the 650-unit classification is presented in Appendix B. The 25- element classification is presented below: Ai Old alluvial plain with scattered deposits of eolian, residuum, and slopewash ai Alluvium with scattered deposits of terrace, slopewash, eolian, residuum, grus and glacial aR Shallow Alluvium mixed with scattered bedrock outcrops bi Bench including eolian, slopewash, outwash, and bench and/or mesa bdi Dissected bench with scattered deposits of residuum, slopewash, landslide, and eolian tdi Dissected terrace deposits mixing with alluvium, residuum, eolian, and slopewash ti Terrace deposits mixed with scattered deposits of alluvium, residuum, eolian, slopewash, and outwash tre Shallow terrace deposits mixed with scattered deposits of eolian and residuum fi Alluvial fan and gradational fan deposits mixed with scattered deposits of slopewash, residuum, and eolian fdi Dissected alluvial fan and gradational fan deposits mixed with scattered deposits of slopewash and residuum mi Mesa including scattered deposits of residuum and eolian ei Eolian mixed with scattered deposits of residuum, alluvium, and slopewash oai Glacial outwash and alluvium mixed with scattered deposits of glacial, terrace, hot spring, bedrock outcrops, residuum, slopewash and grus gi Glacial deposits mixed with scattered deposits of slopewash, residuum, grus, alluvium, colluvium, landslide, and/or bedrock outcrops li Landslide mixed with scattered deposits of slopewash, residuum, Tertiary landslides, and bedrock outcrops; landslides too small and numerous to show separately pea Playa deposits mixed with scattered deposits of alluvium, eolian, and r; playa deposits too small to show separately sci Slopewash and colluvium mixed with scattered deposits of slopewash, residuum, grus, glacial, periglacial, alluvium, eolian, and/or bedrock outcrops ri Residuum mixed with alluvium, eolian, slopewash, grus, and/or bedrock outcrops ui Grus mixed with alluvium, eolian, slopewash, grus, and/or bedrock outcrops Ri Bedrock and glaciated bedrock including hot spring deposits and volcanic necks; mixed with scattered shallow deposits of eolian, grus, slopewash, colluvium, residuum, glacial, and alluvium. Mi Mined areas mixed with scattered deposits of residuum, slopewash, and/or bedrock outcrops Ki Karst areas mixed with scattered deposits of residuum, slopewash, alluvium and/or bedrock outcrops ki Clinker mixed with scattered deposits of residuum, slopewash, alluvium and/or bedrock outcrops xi Truncated bedrock mixed with scattered shallow deposits of eolian, terrace, residuum, alluvium, old alluvial plain, bench, and slopewash Ti Structural terrace including and/or mixed with deposits of alluvium, eolian, residuum, slopewash, and terrace. For a more detailed attribute listing, please see the citation below. Entity_and_Attribute_Detail_Citation: Case, J.C., Arneson, C.S., and Hallberg, L.L., 1998, Preliminary 1:500,000-scale digital surficial geology map of Wyoming: Wyoming State Geological Survey, Geologic Hazards Section Digital Map 98-1 (HDSM 98-1), scale 1:500,000. Distribution_Information: Distributor: Contact_Information: Contact_Person_Primary: Contact_Person: Data Manager Contact_Organization: Spatial Data and Visualization Center Contact_Address: Address_Type: mailing address Address: Box 3355 University Station City: Laramie State_or_Province: Wyoming Country: USA Postal_Code: 82071 Contact_Voice_Telephone: 307-766-2735 Contact_Electronic_Mail_Address: n/a Distribution_Liability: The distributor shall not be held liable for improper or incorrect use of this data, based on the description of appropriate/inappropriate used described in this metadata document. The distributor makes no claims for the data's suitability for other purposes. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: ARCE (Arc/Info export) Format_Version_Number: 7.0.4 Format_Version_Date: 1995 Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: see access instructions Access_Instructions: The data can be accessed online two different ways: By Web or by anonymous ftp server, ftp.sdvc.uwyo.edu, and the data is stored in the /pub/gis directory. The WWW page is http://www.sdvc.uwyo.edu/clearinghouse. Instructions are provided on-line for downloading and importing the data. Online_Computer_and_Operating_System: Both the ftp and WWW server which this data is available from is a Silicon Graphics Challenge server, running the IRIX 6.2 UNIX operating system. Fees: No fees are required for downloading the data that is on-line. Some fees may be required to cover costs of tapes if data is required on tape media. Metadata_Reference_Information: Metadata_Date: 19980526 Metadata_Contact: Contact_Information: Contact_Person_Primary: Contact_Person: Margo Herdendorf Contact_Address: Address_Type: mailing address Address: Box 3355 University Station City: Laramie State_or_Province: Wyoming Postal_Code: 82071 Country: USA Contact_Voice_Telephone: 307-766-2735 Contact_Electronic_Mail_Address: meh@uwyo.edu Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: 19940608